Lawnmower
The largest range in the catalogue, covering push mowers and ride-ons across roughly 30 categories.
The fast movers sit where you would expect. Blades, in swing back, bar and edger patterns. Belts in A, B and M section, plus Kevlar and OEM spec. Air filters and pre-cleaners. Spark plugs. Cables and throttle controls. Then the parts that only come up when something has failed: spindles, pulleys, bearings, gaskets, governor springs, starter recoils.
Filtering by OEM brand is usually faster than browsing, and the brand list here is long. Briggs and Stratton, Honda, Kohler, Victa, Rover, Masport, Cox, Greenfield, Husqvarna, MTD, AYP, John Deere, Cub Cadet and more.
Not a dealer? Your local JAK Max dealer stocks this range and can match the part to your machine.
Governor Parts
Cables & Controls
Drive & Steering Parts
Edger Blades
Electrical Parts
Fuel Cans & Accessories
Fuel Line, Fuel Caps & Accessories
Gaskets
Genuine Parts
Blade Adaptors & Holders
Internal Engine Parts
Starter Handles
Starter Parts
Starter Rope
Trailers & Ramps
Tyres & Tubes
Wheels & Accessories
Spindles & Shafts
Maintenance Kits
Mufflers & Accessories
Oil & Lubricants
Oil & Transmission Filters
Oil Seals & Accessories
Pins & Keys
Pulleys
Push Mower Parts
Ride-On Mower Parts
Swing Back Blades
Spark Plugs
Accessories
Air Filter Covers & Accessories
Air Filters
Bar Blades
Bearings & Bushings
Belts
Filters
Filters
×Product Category 
Price
Stock Availability
Filters
Product Category
Price
Stock Availability
IN STOCKBar Blade – 622mm/24-1/2″ Kubota – 3 for 72″
(3) Blades for 72” cut. Suits 72″ ZD28, ZD326 and…
PART NUMBER
B1KU1025
IN STOCKBar Blade – 623mm/24-9/16″ Kubota – 3 for 72″
(3) Blades for 72″ cut. Suits RC72 decks used on…
PART NUMBER
B1KU1041
IN STOCKBar Blade – 633mm/24-15/16″ John Deere – 3 for 72″
(3) Blades for 72” cut. Suits wide range of 72″…
PART NUMBER
B1JD1047
IN STOCKBar Blade – 635mm/25″ John Deere – 3 for 72″
(3) Blades for 72” cut. Suits 7 Iron decks. Suits…
PART NUMBER
B1JD6018
IN STOCKBar Blade – 635mm/25″ Snapper – 25″ cut
(1) Blade for 25” cut rear engine rider. Punched for…
PART NUMBER
B1SN3005
IN STOCKBar Blade – 636mm/25-1/16″ Walker – 2 for 48″. Left Hand
(2) Blades for 48″ cut. Takes (1) B1WA3402 Blade and…
PART NUMBER
B1WA3402
IN STOCKBar Blade – 636mm/25-1/16″ Walker – 2 for 48″. Right Hand
(2) Blades for 48″ cut. Takes (1) B1WA3402 and (1)…
PART NUMBER
B1WA3403
IN STOCKBar Blade – 641mm/25-7/32″ Aftermarket Toro – 3 for 72″
(3) Blades for 72” cut. Suits Groundsmaster 322D, 322, 325D…
PART NUMBER
B1SB94040
IN STOCKBar Blade – 660mm/26″ Ariens – 26″ cut
For 26” cut rear engine rider model 927000. Use B1SB911…
PART NUMBER
B1SB1096
IN STOCKBar Blade – 660mm/26″ Snapper – 26″ cut
(1) Blade for 26” cut rear engine rider. Punched for…
PART NUMBER
B1SN3002
OUT OF STOCKBar Blade – 762mm/30″ Ariens/Maxim – 30″ cut
Suits 30” cut rear engine rider. Use B1SB911 Air Lifts.
PART NUMBER
B1AR1025
OUT OF STOCKBar Blade – 762mm/30″ Murray – 30″ Cut. Low-Lift
(1) Blade for 30” cut. Low lift.
PART NUMBER
B1SB2167
IN STOCKBar Blade – 762mm/30″ Snapper – 30″ cut
(1) Blade for 30” cut rear engine rider. Punched for…
PART NUMBER
B1SN3003
IN STOCKBar Blade – 838mm/33″ Snapper – 33″ cut
(1) Blade for 33” cut rear engine rider. Mulching.
PART NUMBER
B1SN3010
IN STOCKBar Blade – 838mm/33″ Snapper – 33″ cut
(1) Blade for 33” cut rear engine rider. Punched for…
PART NUMBER
B1SN3001
