Lawnmower
The largest range in the catalogue, covering push mowers and ride-ons across roughly 30 categories.
The fast movers sit where you would expect. Blades, in swing back, bar and edger patterns. Belts in A, B and M section, plus Kevlar and OEM spec. Air filters and pre-cleaners. Spark plugs. Cables and throttle controls. Then the parts that only come up when something has failed: spindles, pulleys, bearings, gaskets, governor springs, starter recoils.
Filtering by OEM brand is usually faster than browsing, and the brand list here is long. Briggs and Stratton, Honda, Kohler, Victa, Rover, Masport, Cox, Greenfield, Husqvarna, MTD, AYP, John Deere, Cub Cadet and more.
Not a dealer? Your local JAK Max dealer stocks this range and can match the part to your machine.
Governor Parts
Cables & Controls
Drive & Steering Parts
Edger Blades
Electrical Parts
Fuel Cans & Accessories
Fuel Line, Fuel Caps & Accessories
Gaskets
Genuine Parts
Blade Adaptors & Holders
Internal Engine Parts
Starter Handles
Starter Parts
Starter Rope
Trailers & Ramps
Tyres & Tubes
Wheels & Accessories
Spindles & Shafts
Maintenance Kits
Mufflers & Accessories
Oil & Lubricants
Oil & Transmission Filters
Oil Seals & Accessories
Pins & Keys
Pulleys
Push Mower Parts
Ride-On Mower Parts
Swing Back Blades
Spark Plugs
Accessories
Air Filter Covers & Accessories
Air Filters
Bar Blades
Bearings & Bushings
Belts
Filters
Filters
×Product Category 
Price
Stock Availability
Filters
Product Category
Price
Stock Availability
IN STOCKBar Blade – 538mm/21-3/16″ MTD – 2 for 42″ Mulching
(2) Blades for 42” cut. Mulching. Suits 42″ MTD deep…
PART NUMBER
B1MA2414
IN STOCKBar Blade – 538mm/21-3/16″ MTD – 2 for 42″ Mulching
(2) Blades for 42” cut. Mulching. Suits 42″ MTD deep…
PART NUMBER
JMMA2414
IN STOCKBar Blade – 538mm/21-3/16″ MTD/Toro – 2 for 42″
(2) Blades for 42” cut. Suits MTD models.
PART NUMBER
B1MA2416
IN STOCKBar Blade – 538mm/21-3/16″ MTD/Toro – 2 for 42″
(2) Blades for 42” cut. Suits MTD models.
PART NUMBER
JMMA2416
IN STOCKBar Blade – 538mm/21-3/16″ Murray – 2 for 42″
(2) Blades for 42” cut. 3-in-1 blade. Suits most 42″…
PART NUMBER
B1MU2627
IN STOCKBar Blade – 538mm/21-3/16″ Snapper – 2 for 42″
(2) Blades for 42″ cut. Suits LT100 & 150Z Zero…
PART NUMBER
B1SN3013
IN STOCKBar Blade – 539mm/21-1/4″ Cub Cadet – 2 for 42″
(2) Blades for 42″ cut. Suits 42″ Cub Cadet ZTR,…
PART NUMBER
B1CC1426
IN STOCKBar Blade – 539mm/21-1/4″ John Deere – 2 for 42″
(2) Blades for 42″ cut. Side discharge models. Suits 42″…
PART NUMBER
B1JD1091
OUT OF STOCKBar Blade – 539mm/21-1/4″ Murray – 2 for 42″
(2) Blades for 42” cut. 3-in-1 blade. Suits most 42″…
PART NUMBER
B1MU2615
OUT OF STOCKBar Blade – 539mm/21-1/4″ Murray – 2 for 42″
(2) Blades for 42” cut.
PART NUMBER
B1MU2630
IN STOCKBar Blade – 539mm/21-1/4″ Murray – 2 for 42″. High-Lift
(2) Blades for 42” cut. High lift. Suits most 42″…
PART NUMBER
JMMU2619
IN STOCKBar Blade – 539mm/21-1/4″ Murray – 2 for 42″. High-Lift
(2) Blades for 42” cut. High lift. Suits most 42″…
PART NUMBER
B1MU2619
OUT OF STOCKBar Blade – 539mm/21-1/4″ Murray – 2 for 42″. Low-Lift
(2) Blades for 42″ cut. Low lift. Suits most 42″…
PART NUMBER
B1MU2620
IN STOCKBar Blade – 542mm/21-3/8″ John Deere – 2 for 42″
(2) Blades for 42″ cut. Suits GT225, GT235, GT235E, GT245,…
PART NUMBER
B1JD1046
IN STOCKBar Blade – 542mm/21-3/8″ John Deere – 2 for 42″
(2) Blades for 42″ cut. Suits 42″ Z235 EZTrak, Z225…
PART NUMBER
B1JD6022
